Description
| Caliber | 5.56 x 45 mm (.223 Rem) |
| Muzzle velocity | 2,591 – 2,723 feet per sec. |
| Number of grooves in barrel | 4 |
| Twist of rifling | 1 in 7 inches |
| Overall length of pistol (not including sling swivel) | 20.75 in |
| Barrel length (measured from muzzle to bolt face) | 11.90 in |
| Length of sight line | 10.43 in |
| Rear sight gradient | 100m to 800m |
| Width of pistol | 2.32 in |
| Height of pistol with magazine | 9.45 in |
| Practical rate of fire | 40 shots/min |
| Maximum range of fire | 1,800 m |
| Lethal range of projectile | 1,400 m |
| Weight of pistol without magazine | 5.73 lbs |
| Weight of pistol with loaded magazine | 6.87 lbs |
| Weight of empty magazine | 0.33 lbs |
| Weight of full magazine | 1.12 lbs |
| Trigger pull | 5.51lbs to 5.95lbs (24.5-26.5N) |
Additional Notes: The bayonet lug is not attached to the front sight. Reason: it is not possible to fix a bayonet to the vz.58 pistol as the proximity of the bayonet lug to the gas adapter/block does not permit attachment. All parts used used on the pistol, except the US made glass-filled nylon trigger are Czech made. In addition, CzechPoint is unable to fill requests for the type of front sling swivel, front sight base, and/or trigger guard (rear sling swivel is the same for all vz.58 pistols – as shown in the photo).
Pistol includes the glass-filled nylon US made trigger. If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger and it will be installed before your pistol ships. Section 922(r) is not applicable to the vz. 58 pistol model as it is a pistol and not a rifle. The color of the finish is a matte black coating (cured at 300°F). The new production pistol barrel is made from a high alloy Chrome Molybdenum steel (4340) and IS chrome-lined. The muzzle nut is removeable and the thread pattern is 14×1 right hand (standard vz.58 thread pattern).
For those that receive an approved BATFE Form 1 SBR (short barreled rifle) for their vz.58, the sling swivel screw can be removed (receiver sling plate is held to the receiver by sling swivel screw). Once the sling swivel screw and receiver sling plate is removed, any vz.58 stock can be readily attached to the vz.58 receiver. This is a great ‘do-it-yourself’ Form 1 SBR. SBR Warning: a stock can only be legally attached to this pistol after a Form 1 has been approved by BATFE. Attaching a stock to the vz.58 pistol, without an approved Form 1, is a federal felony and conviction could result in 10 years imprisonment and a $250,000 fine.
Drilled and tapped holes for the receiver side rail ARE included in the purchase price of the pistol. In other words, you can easily install our optional side rail by removing the two screws in the receiver and screw on the side rail with a hex/Allen wrench. GUNSMITHING IS NOT REQUIRED TO ATTACH THE SIDE RAIL TO OUR VZ.58 PISTOL. Do not forget to use high strength thread-locker on the screws while attaching the side rail. To purchase the side rail, please see the vz.58 spare parts section (part no: VZ58-59R) or type VZ58-59R into the ‘search’ window and click on ‘receiver side rail.’
The magwell adapter, to use USGI M16/AR-15 magazines, is sold separately as an accessory and is not included with the purchase price of the pistol. For information and purchase of the magwell adapter, please visit the vz.58 spare parts section (part number VZ58-6G) or type VZ58-6G in the ‘search’ window.
Reviews
There are no reviews yet.