Description
- Works with both 45° and 90° gas ports
- The ID of the sight is .597 and clamps in place in the existing gas block location. Acceptable journal range for gas block is .590-.599.
- The sight comes in a black oxide finish
- Drum and post included already installed
- Comes with AK Sight Tool
- Gunsmith installation is not required, but highly recommended
- 9/64 allen wrench needed for clamping screws (Not included – We highly recommend using a tool such as Wheeler inch torque wrench and the use of thread locker to prevent the screws from backing out under fire)
- 1/8th allen wrench needed for gas set screw
- Pinch screw torque 25in – 50in lbs (Due to varying spec of AK barrels)
- Weighs 4.8oz
***Our gas blocks will work with most AKM/AK74 patterned rifles with the acceptable journal range listed above. For all Serbian/Yugoslavian, Chinese, Vepr, or other larger size barrels it will require a professional gunsmith for installation.***
Zeroing Recommendations:
For RD builds we will traditionally do a rough zero at 25yds with the rear sight set at the 100 mark. This should get you on paper at 100yds. At that point adjust your elevation for a 100 or 200yd zero and print groups from 25yds to 300yds to know your drop.
We suggest a 100yd zero for 7.62×39 AKs and a 200yd zero for 5.45×39 & 5.56×45. We’ve founds that these distances provide the best groups for combat effective accuracy at different distances out to 300yds+ before needing to “hold over” or combat effective hits.
Reviews
There are no reviews yet.