Description
- Upper Receiver: Fully CNC machined from 7075-T6 aluminum for extreme precision and enhanced durability. Flat top picatinny design for versatility in mounting optics and other enhanced components. CNC engraved numbered rail system. Lead Star’s truss system design reinforces key areas for increased strength without added weight. M4 feed ramps for added reliability.
- Lower Receiver: Incorporates the enhanced features of the upper receiver and also includes the TracStar™ magwell with full traction design. Designed for the operator to grip and maintain weapon control even in the most extreme conditions. Beveled magwell entry allows faster magazine changes. Tension device to maintain rigidity between upper and lower receivers. Rear detent spring capture device to facilitate easier removal of buffer tube. Built in trigger guard eliminates the need for a flip down trigger guard.
- 17″-15″ Handguard: CNC machined from 6061-T6 aluminum for extreme precision and enhanced durability. Unique design offers ultra capture around the barrel nut eliminating the requirement for anti-rotation tabs. Eliminates harmonics from attached accessories greatly improving weapon accuracy. Four picatinny slots at the 12 o’clock position for mounting back up sights. M-LOK slots at the 3 and 9 o’clock positions and full length M-LOK at the 6 o’clock position for mounting only the picatinny rail needed or accessories. 7075-T6 aluminum barrel nut for the ultimate in lightweight design and strength.
- Fire Control Group: The AR Gold is a drop-in module trigger, which makes it a breeze to install. It comes stock with a 3.5 lb pull weight. More than just the light weight pull, the trigger has the shortest reset and cleanest break of any other trigger on the market. If that isn’t enough it is also Drop-Safe. Adjustable weight engagement and over-travel. .154 pins.
- Fire Selector: Radian™ Talon™ ambidextrous safety selector modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place, no screws to come loose or break. Levers machined from billet aircraft grade aluminum and center shaft machined from hardened steel with black nitride finish.
- Barrel: This .223 Wylde chambered 14.5 inch barrel is machined from 416R Stainless Steel with a bead blasted finish. Our Premium Series Barrels feature a Nickel Boron Coated Extended M4 Feed Ramp Extension. Featuring functionally aggressive flutes and crisp, clean lines, BA Fluted barrels deliver the perfect balance of weight and rigidity. Utilizing six and eight flute designs we’ve achieved weight reduction up to and exceeding 16 ounces. Confidently lighten your kit without sacrificing an ounce of accuracy.
- Gas Block: – 15-position adjustability from 0 – 0.125″ port opening. Metering screw and screw bore design allows repeatability and reliability only SLR has been able to deliver. Single tool click to adjust gas metering. Grade 5 Titanium precision machined gas block with bead-blast finish. Melonite finish 4140 Nexturn Swiss precision metering screw. Stamped Alloy Flat Spring with 1400deg temper. Melonite finish 4140 detent plunger
- Bolt Carrier Group: JP Enterprises LMOS BCG; A low mass carrier provides the most significant improvement to felt recoil after the addition of a compensator. Our LMOS™ carriers remove much of the reciprocating mass out of the rifle’s cycling. This translates into less felt recoil and less movement of the rifle. That means dramatically faster sight recovery and follow-up shots. This carrier group includes our proprietary bolt design, the JP EnhancedBolt™. Superior in every way to a standard Mil-spec bolt, it’s manufactured from SAE 9310, providing drastically extended lifespan with design improvements that ensure superior function. The EnhancedBolt™ is compatible with any AR-15 platform using a Mil-spec bolt carrier and sub-components.
- Charging Handle: Ravage™ unique design geometry produces a faster release and a linear pull. Extended design allows easier charging with added optics and sights. High strength for added reliability under extreme conditions.
- Anti-rotation Pins: Titanium design for a more consistent trigger pull weight and captures trigger pins increasing reliability.
- Gas System: Direct impingement with mid length gas system to reduce recoil and minimize wear on moving parts.
- Muzzle Device: CODA Evolution FURY Titanium Compensator. Ti Grade 5 6Al-4V High-Grade Titanium has some pretty serious advantages over traditional steel. 45% lighter than steel, withstands much more heat than steel (3300°F for Ti vs. 2,700°F for steel) Anti Corrosive and Non Magnetic! Super flat stable with minimal recoil.
- Grip: Hogue or Magpul
- Stock: Dissident Arms Adaptive Stock GEN3
- Buffer System: JP Enterprises Silent Captured Spring JPSCS2-15 GEN 2 (patented) for AR-15-type rifles
- Castle Nut: Ultralight design for further weight reduction and strength. Precision CNC machined from 7075-T6 billet aluminum.
- Receiver End Plate: Ravage™ enhanced design allows for mounting QD swivel sling attachment. Raised QD attachment point makes attaching sling easier and faster. Precision CNC machined from 6061-T6 billet aluminum. High strength for added reliability under extreme conditions.
- More Titanium: Ultralight exotic metal grip screw, handguard fastener screws, stock bolt for further weight reduction and strength.
- Magazine Release Button: Ravage™ enhanced design allows quicker acquisition of magazine release for faster magazine changes. Detailed surface ensures the maximum amount of traction when operating magazine release while adding comfort. High strength for added reliability under extreme conditions. Precision CNC machined from 6061-T6 billet aluminum.
- Magazine: Comes standard with 1 Magpul® 30 Round MOE® PMAG® black magazine.
- Finish: Enhanced Type II anodized.
- Weight: Varies with barrel length
Reviews
There are no reviews yet.