Description
- The AKM/74-100 series version is compatible with original spec AKM (stamped “AK47”), AK 74, and 100 Series fixed stock variant AKs.
- Completely Drop-In part, installs in minutes with zero alterations or fitting required. *
- Machined from solid Aluminum.
- Anodized Finish (MIL-A-8625 Mil-Spec Hard Coat Anodized)
- Includes hardware and tool for installation (Locking drum, alloy steel bolt, allen-key tool)
- Single bolt attachment design combined with aluminum sheer lug for a breaking strength that exceeds buffer tubes themselves.
- Aligns buffer tube closer to bore line for better recoil management via flatter recoil impulse.
- Increased stock height for improved use with optics equipped AKs and still allows comfortable operation with open sights.
- Accepts Mil-Spec and most after market buffer tubes, end plates, and castle nuts.
- Can be installed on trunnions that have had the tang cut off. Upgrade your gun without needing to replace the trunnion.
- Weight: 2.8 oz (with hardware)
* Note: 100% Drop in installation assumes you have an In-Spec rifle with proper rear trunnion, receiver dimensions, and T-nut. Some rear trunnion variations may require you to remove the T-nut to get the locking drum into position during install, however the grip and T-nut will drop right back in after installation. No fitting is required on a quality in-spec properly built AK.
Reviews
There are no reviews yet.