Galil ACE 7.62×39 / 5.45×39 ALG Enhanced w/ Lightning Bow (AKT-EL) – Dissident Arms

$199.00

Dissident Arms Galil ACE Rifle Trigger

A new ALG AKT-EL fire control group has been properly profiled to not only fit but to work flawlessly in your 7.62×39 or 5.45 Galil ACE .  This phenomenal trigger will truly allow you to take your game to the next level.

  • Compatible with GEN1 & GEN2
  • Profiled Hammer
  • Profiled Trigger
  • Trigger Reset Mod
  • Bolt/Carrier Clearance
  • Braided Mainspring Included
  • Safety Engagement Must be Checked

NOTE:  Please note, we do recommend having a qualified gunsmith install and perform all fitting of fire control groups.

Gen 1 firearms require the removal of the hammer over-travel stop.

Comes standard on all of Dissident Arms AK Rifle builds, as well as with our Rifle competition tuning.

Description:

The ALG AK Trigger Enhanced with Lightning Bow (AKT-EL) is a single stage trigger is designed for the AK47 and AK74 variant platforms. The AKT-EL features a shorter pull and a crisper reset than the AKT standard version which is ideal for precision and target shooting. It is machined from gun quality alloy steel.

The AKT-EL features the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT-EL is proudly made in North Wales PA, USA, and lends three parts towards 922(r) Compliance.

In stock

Type of trigger – Single Stage or Two Stage

SKU: DA-ALG-AKT-EL-ACE545762x39 Categories: , ,

Description

Manufacturer Information 

Description:

The AK Trigger Ultimate with Lightning Bow (AKT-EL) is a single stage trigger is designed for the AK47 and AK74 variant platforms.

The ALG Defense AK series of triggers were designed to work with most AK variants without fitting. With AK variants that have a rivet for the rear of the trigger guard, commonly acting as an anti-slap feature, this rivet should be no greater than 0.062 inches tall. Our AK series of triggers are designed to work with rivets that are 0.062 inches in height or less. If this rivet is higher than 0.062 inches, the rivet will have to be shaved down to allow for more clearance. Having improper clearance can result in damage to the disconnector itself.

Alternatively, if the user does not choose to modify the rivet, you can opt to modify the underside of the disconnector to increase the clearance between the bottom of the disconnector and the rivet in the receiver. It is not recommended to completely remove the tail of the disconnector as adverse issues may arise, such as trigger slap. Most users prefer to bevel (angle) the disconnector in the area that would contact the rivet. We recommend shaving down the rivet, not the disconnector tail.

Please note, we do recommend having a qualified gunsmith install and perform all fitting of fire control groups.  AK receivers and parts coming from a wide origin of manufacture vary, there is no agreed upon set specifications.  As such, fitting may be required.  Please note the rivet and/or disconnect will need the proper clearance as per the chart below, failure to have the correct clearance will cause damage.“

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products